Offences

No person employed in any factory shall– (a) wilfully interfere with or misuse any means, appliance or other thing provided in pursuance of these Regulations for securing the safety of the workers employed therein, and where any means or appliance for securing safety is provided for the use of any such person under these Regulations, he shall use the means or appliance; (b) wilfully and without reasonable cause do anything likely to endanger himself or others; (c) wilfully interfere with or misuse any means, appliance, convenience, or other thing provided in pursuance of these Regulations for securing the health and welfare of the persons employed in the factory, and where any means or appliance is provided for the use of any such person, he shall use such means or appliance. Factories 27 FIRST SCHEDULE [Regulation 22] Form A Address of Works: Name of owner, manager or other person having control of the factory: Description or distinctive number of Boiler and type: Age: The history should be briefly stated or reference made to record in earlier reports: Date of last hydraulic test (if any) and pressure applied: Quality: Quality and source of feed water: 1. Boiler– (a) Was the boiler scaled, prepared, and (so far as its construction permits) made accessible, sufficiently for thorough examination and for such tests as may be necessary in order to complete the thorough examination? (b) What parts (if any) were inaccessible? (c) What examination and tests were made? (d) Condition(Sate any defects materially affecting the permissible working pressure) } External Internal 2. Mountings– (a) Are there proper mountings, including safety valve, water gauge and steam gauge? (b) Are all mountings properly maintained and in good working order? (c) Are the water gauges protected? 28 Factories 3. Permissible working pressure for the ensuing 14 months (subject to any conditions stated in paragraphs 4 and 5 calculated from dimensions, and from the thickness and other data ascertained by the present examination; due allowance being made for conditions of working if unusual or exceptionally severe). 4. Repairs (if any) required, and period within which they should be executed. 5. Other observations. I CERTIFY THAT on ................................................................... I thoroughly examined the boiler above described, and that the above is a true report of the result. Signature: ............................... Qualification:............................... Address:............................... Date:............................... Factories 29 FIRST SCHEDULE [Regulation 34] FORM B (i) Name of owner, manager or other person having control of the factory: (ii) Address of factory: (iii) Distinguishing number or mark and description sufficient to identify the chain, rope or lifting tackle: (iv) Date (if after........................................) when the chain, rope, or lifting tackle was first taken into use in the factory: (v) Date of each examination under regulation 30 and by whom it was carried out: (vi) Particulars of any defect found and affecting the safe working load, and of the steps taken to remedy such defect: (vii) Date of the certificate relating to any examination made under regulation 33 together with name and address of the person who issued the certificate: 30 Factories FIRST SCHEDULE [Regulation 36] FORM C (i) Name of manager, owner or other person having control of the factory: (ii) Address of factory: (iii) Distinguishing number or mark (if any) and description sufficient to identify the crane or other lifting machines: (iv) Date of each examination made under regulation 36 and by whom it was carried out: (v) Particulars of any defect found at any such examination and affecting the safe working load, and of the steps taken to remedy such defect. Factories 31 SECOND SCHEDULE [Regulation 54] 12 small dressings (sterilised). 12 large dressings (sterilised). 6 small burn dressings (sterilised). 6 large burn dressings (sterilised). 6 packets Cotton Wool (1/2 oz.) 2 ozs. Sal Volatile. 2 ozs. Iodine. 1 set Splints. 4 rolls splint padding (2 ozs.) 1 Tourniquet. 6 Triangular Bandages. 4 Roller Bandages - 3 yds. x 1". 4 Roller Bandages - 4 yds. x 2". 4 Roller Bandages - 6 yds. x 3". Adhesive Plaster - 5 yds. x 1". 1 Box Safety Pins. 1 Graduated Measure. 32 Factories 1 Pair Scissors. 1 Dressing Forceps. 1 First Aid Booklet (if available). 1 Eye Bath. Zinc Ointment.