← belizelaw.ai · Strata Titles Registration Regulations, Cap. 196s02 · PART II — Strata Plans

Requirements of strata plans

Strata Titles Registration Regulations, reg. 4 · Revised Edition 2020

(1) Every strata plan lodged with the Registrar for registration purposes shall be prepared on the appropriate forms prescribed in the Schedule to these Regulations and shall be issued by the Registrar, unless the Registrar permits otherwise. (2) Every strata plan shall comprise of the following– (a) a first sheet in the form prescribed as Form 1, (using annexures thereto where necessary) on which shall be set out the matters prescribed by section 4(1)(a), (b) and (e) of the Act; (b) a further sheet in the form prescribed as Form 2, (using annexures thereto where necessary) on which shall be set out the matters prescribed by section 4(1)(d) and (f) of the Act; (c) further sheets in the form prescribed as Form 3, (using annexures thereto where necessary) on which shall be set out the matters prescribed by section 4(1)(c) of the Act. (3) All sheets of a strata plan shall be endorsed in the top right hand corner as followssheet (No.)………………of (total No.)…..sheets. Strata Titles 9 (4) The diagram required by section 4(1)(b) of the Act shall be drawn with the north point upwards and parallel to the sides of the form. It shall be drawn to a natural scale which will admit of all details and notations being clearly shown and such diagram shall show offsets in any case where part of the building is within four feet of a boundary of a parcel but no other dimensions shall be necessary. The external surface boundaries of the parcel shown in any such diagram shall be defined by a precise survey in accordance with the Land Surveyors Act. CAP. 187. (5) Floor plans and elevations prepared for the purpose of section 4(1)(c) of the Act shall be drawn with the north point upwards and parallel to the sides of the form and shall be of a size which will admit of all details and notations being clearly shown. (6) The strata lots shall be numbered consecutively, commencing with strata lot 1 and terminating with the strata lot numbered to correspond to the total number of strata lots comprised in the strata plan. Different parts of a building which constitute a single strata lot shall bear the same strata lot number. (7) Printing, writing or drawing shall be clear and legible in black waterproof ink and shall not extend into any margin. (8) Alterations shall be made by striking through the matter intended to be rejected and not by rubbing, scraping, covering or cutting the surface of the paper.
Have a question about this section? Ask belizelaw.ai →