Coordinate and numerical data

(1) In every survey the co-ordinates of permanent control stations shall be tabulated on the plan. (2) Where boundaries of parcels have been fixed, the following additional information shall be given on the plan– (a) the co-ordinates in metres of block corners of regular shaped figures and of all beacons of irregular shaped parcels shall be tabulated; (b) the grid length and whole circle grid bearing of every boundary shall, when possible, be inscribed along the line to which they refer and such lengths and bearings shall be deducted from the final co-ordinates tabulated on the plan. (3) Co-ordinates, and lengths when required by paragraph (2) of this Regulation, shall be shown to two decimal places of a metre. (4) (a) The area of every parcel shall be inscribed where possible within the figures to which it refers to the degree of accuracy prescribed by Regulation 57 of these Regulations; (b) Sufficient space shall be left for the parcel number to be inserted by the Commissioner of 32 Land Surveyors (c) No parcel number shall be inserted by any surveyor. (5) All other data which may serve to clarify or complete any survey plan, shall be shown on the plan.